Write a C Program to create house and perform operations in Graphics

Create house and perform operations


Write a C Program to create house and perform operations in Graphics. Here’s simple C Program to create house and perform operations in Graphics in C Programming Language.


C Program to create a house like figure and perform the following operations.

a. Scaling about the origin followed by translation.

b. Scaling with reference to an arbitrary point.

c. Reflect about the line y = mx + c.


Below is the source code for C Program to create house and perform operations in Graphics which is successfully compiled and run on Windows System to produce desired output as shown below :


SOURCE CODE : :


/*  C Program to create house and perform operations in Graphics  */

#include <stdio.h>
#include <graphics.h>
#include <stdlib.h>
#include <math.h>
#include <conio.h>
 
void reset (int h[][2])
{
    int val[9][2] = {
			{ 50, 50 },{ 75, 50 },{ 75, 75 },{ 100, 75 },
			{ 100, 50 },{ 125, 50 },{ 125, 100 },{ 87, 125 },{ 50, 100 }
		    };
    int i;
    for (i=0; i<9; i++)
    {
	h[i][0] = val[i][0]-50;
	h[i][1] = val[i][1]-50;
    }
}
void draw (int h[][2])
{
    int i;
    setlinestyle (DOTTED_LINE, 0, 1);
    line (320, 0, 320, 480);
    line (0, 240, 640, 240);
    setlinestyle (SOLID_LINE, 0, 1);
    for (i=0; i<8; i++)
	line (320+h[i][0], 240-h[i][1], 320+h[i+1][0], 240-h[i+1][1]);
    line (320+h[0][0], 240-h[0][1], 320+h[8][0], 240-h[8][1]);
}
void rotate (int h[][2], float angle)
{
    int i;
    for (i=0; i<9; i++)
    {
	int xnew, ynew;
	xnew = h[i][0] * cos (angle) - h[i][1] * sin (angle);
	ynew = h[i][0] * sin (angle) + h[i][1] * cos (angle);
	h[i][0] = xnew; h[i][1] = ynew;
    }
}
void scale (int h[][2], int sx, int sy)
{
    int i;
    for (i=0; i<9; i++)
    {
	h[i][0] *= sx;
	h[i][1] *= sy;
    }
}
void translate (int h[][2], int dx, int dy)
{
    int i;
    for (i=0; i<9; i++)
    {
	h[i][0] += dx;
	h[i][1] += dy;
    }
}
void reflect (int h[][2], int m, int c)
{
	int i;
	float angle;
	for (i=0; i<9; i++)
		h[i][1] -= c;
	angle = M_PI/2 - atan (m);
	rotate (h, angle);
	for (i=0; i<9; i++)
		h[i][0] = -h[i][0];
	angle = -angle;
	rotate (h, angle);
	for (i=0; i<9; i++)
		h[i][1] += c;
}
 
void ini()
{
	int gd=DETECT,gm;
	initgraph(&gd,&gm,"..\\bgi");
}
void dini()
{
	getch();
	closegraph();
}
void main()
{
 
	int h[9][2],sx,sy,x,y,m,c,choice;
	do
	{
		clrscr();
		printf("1. Scaling about the origin.\n");
		printf("2. Scaling about an arbitrary point.\n");
		printf("3. Reflection about the line y = mx + c.\n");
		printf("4. Exit\n");
		printf("Enter the choice: ");
		scanf("%d",&choice);
		switch(choice)
		{
			case 1: printf ("Enter the x- and y-scaling factors: ");
				scanf ("%d%d", &sx, &sy);
				ini();
				reset (h);
				draw (h);getch();
				scale (h, sx, sy);
				cleardevice();
				draw (h);
				dini();
				break;
 
			case 2: printf ("Enter the x- and y-scaling factors: ");
				scanf ("%d%d", &sx, &sy);
				printf ("Enter the x- and y-coordinates of the point: ");
				scanf ("%d%d", &x, &y);
				ini();
				reset (h);
				translate (h, x, y);// Go to arbitrary point
				draw(h); getch();//Show its arbitrary position
				cleardevice();
				translate(h,-x,-y);//Take it back to origin
				draw(h);
				getch();
				cleardevice();
				scale (h, sx, sy);//Now Scale it
				draw(h);
				getch();
				translate (h, x, y);//Back to Arbitrary point
				cleardevice();
				draw (h);
				putpixel (320+x, 240-y, WHITE);
				dini();
				break;
 
			case 3: printf ("Enter the values of m and c: ");
				scanf ("%d%d", &m, &c);
				ini();
				reset (h);
				draw (h); getch();
				reflect (h, m, c);
				cleardevice();
				draw (h);
				dini();
				break;
 
			case 4: exit(0);
		}
	}while(choice!=4);
}

Above is the source code for C Program to create house and perform operations in Graphics which is successfully compiled and run on Windows System.The Output of the program is shown above .

If you found any error or any queries related to the above program or any questions or reviews , you wanna to ask from us ,you may Contact Us through our contact Page or you can also comment below in the comment section.We will try our best to reach up to you in short interval.


Thanks for reading the post….

Leave a Reply